730N – Service MANOSKOP® torque wrenches with mount for insert tools
Service MANOSKOP® 730N
- Click-type
- Mount for interchangeable insert tools
- QuickRelease safety lock
- Fast, accurate setting thanks to QuickSelect quick-action adjuster
- Dual stop signal
- Easy-to-read double scale with colour coding to differentiate between N·m/ft·lb and ft·lb/in·lb scales
- The measuring element is only under load while force is being applied, no need for manual reset to zero
- Can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- Any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it.
- Two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
- Calibration using perfectControl calibrating unit
- No 7794 or calibration system No 7706.
- Adjustment without disassembly.
- With certificate
- Registered design
- Display deviation value ± 3%
technical data
| Code | 50181020 |
| EAN code | 4018754139545 |
| EClass 5.1 | 21040222 |
| Size | 20 |
| Scale Range | 40-200 N·m |
| Scale Range | 30-150 ft·lb |
| Scale Division | 10 N·m |
| Scale Division | 5 ft·lb |
| Fine scale Scale Division | 1 N·m |
| Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) mm | |
| b mm | 28 |
| h mm | 23 |
| L mm | 467 |
| LF mm | 424,5 |
| SF mm | 25 |
| Weight g | 1264 |
