730N – Service MANOSKOP® torque wrenches with mount for insert tools
Service MANOSKOP® 730N
- click-type
- mount for interchangeable insert tools
- QuickRelease safety lock
- fast, accurate setting thanks to QuickSelect quick-action adjuster
- dual stop signal
- easy-to-read double scale with colour coding to differentiate between N·m/ft·lb and ft·lb/in·lb scales
- the measuring element is only under load while force is being applied, no need for manual reset to zero
- can be applied for either clockwise or anticlockwise tightening by turning the inserts over
- any force applied to the tool after the ‘click’ or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw – does not act on the trigger mechanism and cannot cause damage to it.
- two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
- calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
- with certificate
- registered design
- display deviation value ± 3%
technical data
| Code | 50581040 |
| EAN code | 4018754164004 |
| EClass 5.1 | 21040222 |
| Size | a/40 |
| Scale Range | 60-300 ft·lb |
| Scale Range | 800-3600 in·lb |
| Scale Division | 20 ft·lb |
| Scale Division | 100 in·lb |
| Fine scale Scale Division | 2 ft·lb |
| Size of Insert Tool Carrier in mm (MANOSKOP) (Inside Square) mm | |
| b mm | 28 |
| h mm | 23 |
| L mm | 607 |
| LF mm | 564,5 |
| SF mm | 25 |
| Weight g | 1655 |
