7380N/ 7385N – Torque angle gauges
For angle controlled bolt/screw tightening, with static read-off pointRead-off possible from any angle thanks to a pair of angled scalesRemovable magnet for attaching sockets with 1/2″ internal square driveFor use in conjunction with tightening tools such as Service MANOSKOP® No 730NSince this tightening method requires a pre-determined snug torque to be applied, it is essential to choose a torque wrench covering both snug torque as well as maximum torque required to reach the recommended tightening angleWhether 1/2″ or 3/4″ sq.dr.Torque Angle Gauge is used depends upon the square drive of the appropriate torque wrench employed.
technical data
| Code | 54010002 |
| EAN code | 4018754136131 |
| EClass 5.1 | 27201701 |
| No | 7385N |
| Inside Square ” | 3/4 |
| Outside Square ” | 3/4 |
| Scale Range | ± 360° |
| Scale Division | 2° |
| B mm | 78 |
| H mm | 76 |
| L mm | 416 |
| Weight g | 720 |
| Diameter in mm mm | 84 |
